:dunno:This question might be easier to answer if I actually knew what I was talking about.... :dunno: :dunno:
OS Ubuntu 9.04
Anyway;
I recently installed shorewall firewall and have it configured and working (at a basic level) but when I run the command
I get the following output;Code:shorewall show capabilities
Ok, most of that list is no concern to me at the moment because, well I don't know what half of it is and one thing at a time, butCode:root@localhost:/# shorewall show capabilities Shorewall has detected the following iptables/netfilter capabilities: NAT: Available Packet Mangling: Available Multi-port Match: Available Extended Multi-port Match: Available Connection Tracking Match: Not available New Connection Tracking Match Syntax: Not available Packet Type Match: Not available Policy Match: Not available Physdev Match: Not available Physdev-is-bridged Support: Not available Packet length Match: Available IP range Match: Not available Recent Match: Not available Owner Match: Not available Ipset Match: Not available CONNMARK Target: Not available Connmark Match: Not available Raw Table: Not available IPP2P Match: Not available CLASSIFY Target: Not available Extended REJECT: Available Repeat match: Not available MARK Target: Not available Mangle FORWARD Chain: Available Comments: Not available Address Type Match: Not available TCPMSS Match: Available Hashlimit Match: Not available NFQUEUE Target: Not available
IP range Match: Not available
This is an issue and http://www.shorewall.net/configurati...s.htm#IPRanges is only helpful if it says 'Available' so I have done a lot of reading and lots of references refer to the kernel and a need to initiate kernel / iptables range ability via some 'menu', setting to 'M' and I think this might occur during OS install process?.
Question;
How can I 'enable IP range'?
Obviously banning a dynamic IP block 1 ip at a time is not practical.
btw as for firewalls and the vps, shorewall was by far the easiest to get up and running and after installing webmin the task of administration is a lot simpler and less terminal intensive!


LinkBack URL
About LinkBacks

Reply With Quote

